Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Michael Johnson

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the outer frame and and pull the cables through the hole. Flip the frame upside down.
[* blackred] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_caution] In picture 2, the power button is the left (relative to the picture, not the orientation) and the brightness is the right button. If you orient the frame so that the buttons are at the bottom and the white dots on them are facing you, the power is on the right and the brightness is on the left
[* blackred] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_caution] In picture 2, the power button is the left (relative to the picture, not the orientation) and the brightness is the right button. If you orient the frame so that the buttons are at the bottom and the white dots on them are facing you, the power is on the right and the brightness is on the left