Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Alan Truong

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the outer frame and and pull the cables through the hole. Flip the frame upside down.
[* red] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_note]
In picture 2, the power button is the left (relative to the picture, not the orientation)right and the brightness is the rightleft button. If you orient
[* orange] Remove
the frame so that the buttons arescrews at the bottom andholding the white dots on thembutton(s) down
[* icon_note] In this picture we
are facing you,removing the power is on the right and the brightness is on the leftbutton
[* red] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_note]
In picture 2, the power button is the left (relative to the picture, not the orientation)right and the brightness is the rightleft button. If you orient
[* orange] Remove
the frame so that the buttons arescrews at the bottom andholding the white dots on thembutton(s) down
[* icon_note] In this picture we
are facing you,removing the power is on the right and the brightness is on the leftbutton

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão