Alterações no passo nº 4
Edição por Sam Gustafson —
Edição aprovada por Sam Gustafson
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove shutter speed selector assembly | |
| [* red] Unsolder two yellow wires. | |
| [* orange] Remove one #00 4.0 mm screw. | |
| [* yellow] Remove one #00 2.2 mm screw. | |
| [* green] Remove one #00 2.5 mm screw. | |
| [* light_blue] Remove high speed cam. | |
| - | [* icon_note] '' |
| + | [* icon_note] ''Installation Note:'' Set dial to 'Auto' before installing. Unlock the viewfinder indicator and check that it is showing the correct speeds in the viewfinder as the dial is turned. |