| + | [* black] In the picture of the previous stage, 4 more strokes are marked in green - these are the same A11-A10 and B11-B10 after the multiplexers (the most delicate and unprotected parts of the port - they damaged first) |
|---|
| + | [* black] There are no separation capacitors, as you can see, due to the required wire length. |
|---|
| + | [* black] If they get a supply voltage or a signal from the USB2.0 part - they burn out and stop ringing mirrorily. |
|---|
| + | [* black] As far as I know, the damage is irreversible and occurs in the main chip on the board (repair is not advisable). |
|---|