Histórico do passo nº 4 do guia Meta Quest 2 test USB port - iFixit

Alterações no passo nº 4

Edição por Dmitry — 8 de dez de 2024

Edição aprovada por Dmitry

: Antes
: Depois
: Sem alteração

Linhas do passo

-	[* black] By disconnecting the connector from the board, you can see ~~the~~ picture as in the photo. The purple ~~marks~~ the first pin on the connector, let it be ~~*#1, let it be ~~#2~~*~~ to the left ~~of it~~, then:
+	[* black] By disconnecting the connector from the board, you can see a picture as in the photo. The purple mark is the first pin of the connector. Let it be #1, and let it be #2 to the left, then:
	[* black] *#2* will be *B11* & *#3* will be *B10*
	[* black] *#5* will be *A2* & *#6* will be *A3*
	[* black] *#8* will be *A10* & *#9* will be *A11*
	[* black] *#11* will be *B3* & *#12* will be *B2*
	[* black] In the second row, same counting from the right:
	[* black] *#4* will be *D+* & *#5* will be *D-*