Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Wasim Benbrahim —

Edição aprovada por Wasim Benbrahim

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Remove 5 2 mm Phillips head screws on the back of the device with a #2 Phillips head screwdriver.
-[* blue] Remove 1 2.8 mm Phillips head screw on the back of the device with a #2 Phillips head screwdriver.
-[* yellow] Remove 1 2.3 mm Phillips head screw on the back of the device with a #2 Phillips head screwdriver.
+[* red] Remove 5 20.0 mm Phillips head screws on the back of the device with a #2 Phillips head screwdriver.
+[* blue] Remove 1 28.0 mm Phillips head screw on the back of the device with a #2 Phillips head screwdriver.
+[* yellow] Remove 1 23.0 mm Phillips head screw on the back of the device with a #2 Phillips head screwdriver.