Alterações no passo nº 2
Edição por Emmett Normand —
Edição aprovada por Emmett Normand
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Remove these (4) 4mm bolts and Cover to separate the motor from the trucks. | |
| [* blue] Remove these 4 phillips head screws to free the motor cable. | |
| - | [* icon_note] The motor is a brushless DC motor and will have 4 connections as a result. Three phases and a hall effect sensor |
| + | [* icon_note] The motor is a brushless DC motor and will have 4 connections as a result. Three phases and a hall effect sensor |