Alterações no passo nº 1
Edição por Luke Butzow —
Edição aprovada por Luke Butzow
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Flip the skateboard back over |
|---|---|
| - | [* red] Remove these bolts with your 3mm allen |
| - | [* blue] These bolts will be longer and need to have the nut held to remove them. |
| - | [* black] After the removal of these bolts you can remove the trucks and control module from the board. |
| + | [* black] Flip the skateboard back over. |
| + | [* red] Remove all the bolts indicated on the top side of the skateboard with a 3mm allen wrench, while holding the nut from the underside of the skateboard. |
| + | [* black] After removing these bolts, you can remove the trucks and control module from the board. |