Alterações no passo nº 5
Edição por KyreseAguilar —
Edição aprovada por KyreseAguilar
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Unscrew the screws circled in red with the Phillips head screwdriver. | |
| [* yellow] Unscrew the screws circled in yellow with the TR10 screwdriver. | |
| [* icon_note] The ring will not be hard to remove, but be careful on reassembly. Make sure that the power connector is properly seated when putting the ring back on. | |
| [* light_blue] Unscrew the 4 screws that are circled in blue. These hold the fan protector and are necessary for opening the shell. | |
| - | [* icon_caution] You ***do not*** need to unscrew any screws not circled. These hold 2 pieces together and make reassembly much easier. |
| - | [* black] Move on to Step 5 |