Alterações neste passo
Edição por KyreseAguilar —
Edição aprovada por KyreseAguilar
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Unscrew the singular screw holding the grate at the top using the TR10 screwdriver. Next, unscrew all of the marked screws within the device. |
|---|---|
| + | [* black] Unscrew the singular screw holding the grate at the top using the TR10 screwdriver. |
| + | [* black] unscrew all of the marked screws within the device. |
| [* icon_caution] ***Careful:*** There are two clamps within the grate and you must unclasp them carefully, using the an opening tool of some sort. | |
| [* icon_note] After removing the grate, ***the screen should still be attached***, but can be unscrewed using the Phillips head screwdriver. | |
| [* black] The screws on the side of the case are meant to hold the case together and need to be removed using the same TR10 screwdriver. This will allow the upper portion of the case to be opened later. | |
| [* black] The screws connected to the top part of the fan need to be removed using the Phillips head screwdriver. Doing this also allows the case to be opened/separated for later. |