Alterações neste passo
Edição por Garrett Denham —
Edição aprovada por Garrett Denham
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Flip over the device and remove the bottom and the filter. | |
| - | [* black] Unscrew |
| + | [* black] Unscrew the 9 screws circled, which need both types of screwdrivers. |
| + | [* black] Next are 4 screws that are holding the fan protector to the case. Removing them will allow the case to be opened and will grant access into the rest of the internals. |
| + | [* icon_caution] You ***do not*** need to unscrew the screws that are not circled in picture #3.These simply hold 2 parts together that do not need to be separated unless 1 is broken. Removing them at the same time also allows for an easier reassembly. |