Pular para o conteúdo principal

Alterações no passo #1

Edição por Chris

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] The button boardButton Board, at the base of the LCD LCD Screen, needs to be removed first. It is held on to the LCD frame withby two clips which have holes. Pryclips.
[* black] Pry
these clips over the nubs using a rubber spudger. This will release the clips.
[* black] Caution! The Button Board is still attatched to the PSP by a ribbon cable!
[* black] The button boardButton Board, at the base of the LCD LCD Screen, needs to be removed first. It is held on to the LCD frame withby two clips which have holes. Pryclips.
[* black] Pry
these clips over the nubs using a rubber spudger. This will release the clips.
[* black] Caution! The Button Board is still attatched to the PSP by a ribbon cable!