Alterações no passo nº 13
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Solder the remaining resistors | |
| - | [* black] Repeat this process to solder the 2 kΩ resistors ([link|https://guide-images.cdn.ifixit.com/igi/qM4LadFilODQLknN.full|labeled 202|new_window=true]) in the outlines labeled ***R3***, ***R1***, and ***R5*** on the front of the board. |
| + | [* black] Repeat this process to solder the three 2 kΩ resistors ([link|https://guide-images.cdn.ifixit.com/igi/qM4LadFilODQLknN.full|labeled 202|new_window=true]) in the outlines labeled ***R3***, ***R1***, and ***R5*** on the front of the board. |