Alterações no passo nº 45
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [title] Test your oscilloscope |
| + | [* black] Connect the included Micro USB cable to the USB port on the oscilloscope and to a power source. |
| + | [* black] If your toggle switch is off, slide it to the ***ON*** position to power up your oscilloscope. You should see the display turn on and show a graph. |
| + | [* icon_note] If the oscilloscope does not power on, check your joints to make sure none are bridged, damaged, or incomplete. |
| + | [* black] Turn off the oscilloscope and unplug its USB cable once you've verified its functionality. |