Alterações no passo nº 10
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Press the iron's tip against one of the board's |
|---|---|
| + | [* black] Press the iron's tip against one of the board's ***R2*** solder pads for a few seconds to heat it. |
| [* black] Feed the solder wire into the heated area until there's a concave pool of solder on the pad. | |
| [* black] Remove the solder wire first, then remove the soldering iron from the pad. |