Alterações no passo nº 57
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Install the bottom case | |
| [* black] Align the circuit board's four corner holes with the screws protruding from the bottom acrylic. Orient the board so the back is facing the bottom acrylic. | |
| - | [* black] Insert the four screws through their holes until the board sits flush with the nuts on the bottom |
| + | [* black] Insert the four screws through their holes until the board sits flush with the nuts on the bottom case. |