Alterações no passo nº 36
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Insert the first adjustable resistor | |
| - | [* black] Place the first adjustable resistor (labeled ***W204*** on the top) in the outline labeled ***RP1*** on the front of the board. Make sure the three leads go through their holes in the board. |
| + | [* black] Align the first adjustable resistor (labeled ***W204*** on the top) with the outline labeled ***RP1*** on the front of the board. The gold knob should be closest to the microcontroller. |
| + | [* black] Insert the resistor's three leads into their holes in the board. |