Alterações no passo nº 32
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Insert the display connector | |
| - | [* black] Place the OLED display connector in the outline labeled ***OLED*** on the front of the board. Make sure the seven leads go through their holes in the board, with the connector itself sitting flush with the board. |
| + | [* black] Align the OLED display connector with the outline labeled ***OLED*** on the board. |
| + | [* black] Insert the connector's seven leads into their holes in the board. |