Alterações no passo nº 19
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Align the microcontroller with its 44 pads on the circuit board. | |
| [* icon_caution] Ensure the microcontroller is aligned both vertically AND horizontally. Once multiple pads are soldered, it is extremely difficult to remove the microcontroller and try again. | |
| - | [* black] Hold the microcontroller still with tweezers and re-heat the solder from the last two steps to solder it to the board. |
| + | [* black] Hold the microcontroller still with [product|IF145-020-5|tweezers|new_window=true] and re-heat the solder from the last two steps to solder it to the board. |
| [* icon_note] If you have [product|IF145-113|polyimide tape|new_window=true], you can use it to hold the microcontroller still while you solder the first two leads. |