Alterações no passo nº 16
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Press the tip against the second LED solder pad and feed the solder wire into the heated area until there's a small |
|---|---|
| + | [* black] Press the tip against the second LED solder pad and feed the solder wire into the heated area until there's a small glob of solder contacting the end cap. |
| [* icon_note] The LED's contact pads are underneath it, so the solder joint doesn't need to cover the entire end. | |
| [* black] Remove the solder wire first, then remove the soldering iron from the pad. |