Alterações no passo nº 9
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Check your work |
|---|---|
| + | [* icon_note] Congratulations—you've soldered the resistor to the board! |
| + | [* icon_note] If one of the solder joints doesn't make contact with a conductive edge, reheat the edge and add more solder. |
| + | [* icon_note] Check if any solder unintentionally bridged with a different joint. If so, carefully use your iron to heat the solder between the joints and separate the bridge. If the bridge doesn't want to separate, [guide|173873|desolder|stepid=370680|new_window=true] it and try again. |