Alterações no passo nº 3
Edição por Nick Schultz —
Edição aprovada por Nick Schultz
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use your tweezers to carefully peel back the plastic from the all five resistor and capacitor [link|https://guide-images.cdn.ifixit.com/igi/u2qUybkhVvRCORnr.full|protective covers|new_window=true]. |
|---|---|
| - | [* black] Remove the resistors and capacitors from their covers and arrange them by size and label. |
| - | [* icon_note] To learn more about how to read surface-mount resistor labels, [link|https://www.electricaltechnology.org/2013/07/how-to-calculate-or-find-value-of-smd.html|click here|new_window=true]. |
| + | [* icon_note] To learn more about how to read surface-mount resistor labels, [link|https://www.electricaltechnology.org/2013/07/how-to-calculate-or-find-value-of-smd.html|click here|new_window=true]. |
| + | [* red] LED |
| + | [* orange] 1W/10 kΩ (103) resistor |
| + | [* yellow] 10 kΩ (103) resistor |
| + | [* green] 2 kΩ (202) resistors |
| + | [* light_blue] 10 μF capacitor |
| + | [* blue] 10 nF (103) capacitor |
| + | [* violet] 22 nF capacitor |