Histórico do passo nº 15 do guia Cricut Maker 3 Belt Replacement

Alterações no passo nº 15

Edição por Spencer Pennington — 30 de set de 2024

	[* icon_caution] The screws in this step have different threads. Keep close track of where screws go to avoid stripping the screw wells.
	[* black] Use a Phillips screwdriver to remove eight screws from the right end of the Cricut:
-	[* red] Two 10.2 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/JtDTFFbAeHngjqcb.full\|screws\|new_window=true] securing the right end top metal ~~bar~~, which include a washer and a locking washer.
+	[* red] Two 10.2 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/JtDTFFbAeHngjqcb.full\|screws\|new_window=true] securing the right end top metal track, which include a washer and a locking washer.
	[* orange] Four 10.0 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/ot1N6pqk4OOCEUZD.full\|screws\|new_window=true] securing the large white plastic bracket.
	[* yellow] Two 7.9 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/w5RvlMOMHsYHCeHM.full\|screws\|new_window=true] securing the large white plastic bracket, which include white plastic spacers.
-	[* icon_reminder] During reassembly, be sure to reconnect the [link\|https://guide-images.cdn.ifixit.com/igi/1VoGESevcWPYCQRe.full\|motor ground wire\|new_window=true] to the right-most screw that secures the top metal ~~bar~~.
+	[* icon_reminder] During reassembly, be sure to reconnect the [link\|https://guide-images.cdn.ifixit.com/igi/1VoGESevcWPYCQRe.full\|motor ground wire\|new_window=true] to the right-most screw that secures the top metal track.

	[* icon_caution] The screws in this step have different threads. Keep close track of where screws go to avoid stripping the screw wells.
	[* black] Use a Phillips screwdriver to remove eight screws from the right end of the Cricut:
-	[* red] Two 10.2 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/JtDTFFbAeHngjqcb.full\|screws\|new_window=true] securing the right end top metal ~~bar~~, which include a washer and a locking washer.
+	[* red] Two 10.2 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/JtDTFFbAeHngjqcb.full\|screws\|new_window=true] securing the right end top metal track, which include a washer and a locking washer.
	[* orange] Four 10.0 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/ot1N6pqk4OOCEUZD.full\|screws\|new_window=true] securing the large white plastic bracket.
	[* yellow] Two 7.9 mm‑long [link\|https://guide-images.cdn.ifixit.com/igi/w5RvlMOMHsYHCeHM.full\|screws\|new_window=true] securing the large white plastic bracket, which include white plastic spacers.
-	[* icon_reminder] During reassembly, be sure to reconnect the [link\|https://guide-images.cdn.ifixit.com/igi/1VoGESevcWPYCQRe.full\|motor ground wire\|new_window=true] to the right-most screw that secures the top metal ~~bar~~.
+	[* icon_reminder] During reassembly, be sure to reconnect the [link\|https://guide-images.cdn.ifixit.com/igi/1VoGESevcWPYCQRe.full\|motor ground wire\|new_window=true] to the right-most screw that secures the top metal track.