Alterações no passo nº 1
Edição por Kristen Gismondi —
Edição aprovada por Kristen Gismondi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Flip over the cup warmer so that the underside is facing up. | |
| - | [* black] You will see four small rubber nonslip pads. To disassemble the cup warmer, you need to unscrew the screws that are under each pad. |
| - | [* red] To expose the screws, use either your fingers, a screwdriver, or any other long, flat object to lift and peel away the rubber pads. |
| - | [* orange] Using a #2 Phillips screwdriver, unscrew each of the four 10mm screws. |
| + | [* red] Use your fingers or a spudger to lift and peel away the rubber pads. |
| + | [* orange] Remove the four 10 mm screws using a Phillips #2 screwdriver. |
| [* black] Flip over the cup warmer so that the top side is facing up, then lift away the front plate. |