Conserte seus objetos Comunidade Loja

Alterações no passo nº 12

Edição por Spencer Pennington —

Edição aprovada por Spencer Pennington

Antes
Depois
Sem alteração

Linhas do passo

+[* icon_caution] Be careful when removing the E-clip in this step so you don't lose it.
[* black] Insert a small flathead screwdriver or similar prying tool into a notch of the E‑clip that secures the roller bar.
-[* black] Use a screwdriver or similar prying tool to remove the E‑clip from the left end of the roller bar.
+[* black] Use the screwdriver or prying tool to pry the E‑clip off the roller bar.
[* icon_note] You can place your thumb or a small piece of tape over the clip to keep it from flying away.
[* icon_reminder] During reassembly, you can [link|https://guide-images.cdn.ifixit.com/igi/lWV2Hps6gbGsvxFy.full|hold the E‑clip in place with a small piece of tape|new_window=true] then use a pair of needle nose pliers to squeeze the clip onto the roller bar.