Histórico do passo nº 13 do guia Cricut Maker 3 Top Cover Replacement

Alterações no passo nº 13

Edição por Spencer Pennington — 30 de set de 2024

	[title] Disconnect the button board
-	[* icon_note] There is a [link\|https://guide-images.cdn.ifixit.com/igi/kTteey1Rp1sSqjjr.full\|cable that connects the buttons on the top cover\|new_window=true] to the Cricut.
+	[* icon_note] There's a [link\|https://guide-images.cdn.ifixit.com/igi/kTteey1Rp1sSqjjr.full\|cable that connects the buttons on the top cover\|new_window=true] to the Cricut.
	[* black] Use a spudger to disconnect the [guide\|25629\|sliding connector\|stepid=64975\|new_window=true] from the button board.

	[title] Disconnect the button board
-	[* icon_note] There is a [link\|https://guide-images.cdn.ifixit.com/igi/kTteey1Rp1sSqjjr.full\|cable that connects the buttons on the top cover\|new_window=true] to the Cricut.
+	[* icon_note] There's a [link\|https://guide-images.cdn.ifixit.com/igi/kTteey1Rp1sSqjjr.full\|cable that connects the buttons on the top cover\|new_window=true] to the Cricut.
	[* black] Use a spudger to disconnect the [guide\|25629\|sliding connector\|stepid=64975\|new_window=true] from the button board.