Alterações no passo nº 4
Edição por Spencer Pennington —
Edição aprovada por Spencer Pennington
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [title] Remove the screws |
|---|---|
| + | [title] Remove the screws from the metal track |
| [* icon_note] Inside the Cricut are [link|https://guide-images.cdn.ifixit.com/igi/KXtG2binGWdCaJlk.full|seven screws securing the top cover to the metal track that holds the Double Tool Holder|new_window=true]. You can reach these screws by [link|https://guide-images.cdn.ifixit.com/igi/ur2RxlpgSNucZ2PR.full|putting a screwdriver bit in a socket wrench|new_window=true]. If you are using iFixit bits, the smaller bits work with a 4‑mm socket and the larger bits work with a 1/4‑inch socket. | |
| [* red] Use a Phillips screwdriver to remove the seven 9.8 mm‑long screws securing the top cover to the metal track. |