Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[* black] After the entire working surface of the iron tip has been coated with solder, clean off any excess solder with your brass ball or damp cellulose sponge.
[* icon_note] "Stabbing" the brass wool or wiping the tip with a damp sponge a few times should do the job.
[* black] Whether you're actively soldering or about to store your iron, you should ''always'' keep your tip tinned for these two reasons:
[* icon_note] A tinned tip transfers heat much more effectively, making soldering a breeze.
- [* icon_note] The solder coat creates a barrier between the tip and environment, dramatically reducing the rate of oxidation.
+ [* icon_note] The coat of solder creates a barrier between the tip and environment, dramatically reducing the rate of oxidation.