Alterações no passo nº 3
Linhas do passo
| - | [title] |
|---|---|
| + | [title] Tinning the Tip |
| [* black] After cleaning off buildup with your brass or damp cellulose sponge, immediately feed some fresh [product|IF145-077|rosin-core solder|new_window=true] onto the entire working surface of the tip. | |
| [* icon_note] If the tip is clean and hot, solder should readily wet (melt and flow onto) the tip. | |
| [* icon_reminder] Coating the working area of a tip in a layer of solder is called "tinning." |