Alterações no passo nº 3
Linhas do passo
| [title] Tinning the Tip | |
| [* black] After cleaning off buildup with your brass wool or sponge, immediately feed some fresh [product|IF145-077|rosin-core solder|new_window=true] onto the entire working surface of the tip. | |
| [* icon_note] If the tip is clean and hot, solder should readily wet (melt and flow onto) the tip. | |
| - | [* icon_reminder] Coating the |
| + | [* icon_reminder] Coating the working area tip in a layer of solder is called "tinning." |