Alterações no passo nº 3
Linhas do passo
| - | [* black] After cleaning off buildup with your brass wool or sponge, immediately feed some fresh solder onto the entire working surface of the tip. |
|---|---|
| - | [* icon_note] If the tip is clean and hot, solder should readily wet (flow onto) the tip. |
| + | [* black] After cleaning off buildup with your brass wool or sponge, immediately feed some fresh rosin-core solder onto the entire working surface of the tip. |
| + | [* icon_note] If the tip is clean and hot, solder should readily wet (melt and flow onto) the tip. |
| [* black] Coating the iron tip in a layer of solder is called "tinning." |