Conserte seus objetos Comunidade Loja

Alterações no passo nº 7

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Mechanical Abrasives
[* icon_caution] The use of abrasives to clean iron tip oxidation is debated in the soldering community, and should generally only be turned to as a last resort. Some argue that if tip tinner didn't remove the oxidation, your tip is about ready for retirement anyway.
-[* black] Gently drag the tip across the surface of a polishing bar or high-grit sandpaper, following the shape of the tip.
-[* black] [Pic one; Working surface pressed against abrasive surface. Pic two: Dragging across the surface. Pic three: showing the removed oxidation on the tip, preferably framed so that the still-oxidized side is visible.]
+[* black] Gently drag the tip across the surface of a polishing bar or high-grit sandpaper, following the [shape? curvature?] of the tip.
+[* black] [Pic one; Working surface pressed against abrasive surface. Pic two: Dragging across the surface.]
[* icon_note] Be sure to evenly abrade the working surface.
[* icon_caution] Stop as soon as the stubborn oxidation is removed.