Conserte seus objetos Comunidade Loja

Alterações no passo nº 7

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Mechanical Abrasives
-[* icon_caution] Using abrasives to clean oxidation is highly contentious in the soldering community, and should generally only be turned to as a last resort. Some might argue that if tip tinner didn't remove the oxidation, your tip is about ready for retirement anyway.
+[* icon_caution] The use of abrasives to clean iron tip oxidation is debated in the soldering community, and should generally only be turned to as a last resort. Some argue that if tip tinner didn't remove the oxidation, your tip is about ready for retirement anyway.
[* black] Gently drag the tip across the surface of a polishing bar or high-grit sandpaper, following the shape of the tip.
-[* black] Be sure to evenly abrade the working surface.
+[* black] [Pic one; Working surface pressed against abrasive surface. Pic two: Dragging across the surface. Pic three: showing the removed oxidation on the tip, preferably framed so that the still-oxidized side is visible.]
+[* icon_note] Be sure to evenly abrade the working surface.
[* icon_caution] Stop as soon as the stubborn oxidation is removed.