Conserte seus objetos Comunidade Loja

Alterações neste passo

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Before you put your iron away
-[* black] When the tip is clean, flood the hot iron tip with solder to prevent any air or moisture reaching the tip during use and storage; this process is called "tinning."
-[* black] During soldering and storage, you should ''always'' keep the tip tinned for these two reasons:
+[* black] When the tip is clean, flood the hot iron tip with solder to prevent any air or moisture reaching the tip.
+ [* icon_note] This process is called "tinning."
+[* black] Both while soldering and before storage, ''always'' keep the tip tinned for these two reasons:
[* icon_note] A tinned tip transfers heat much more effectively, making soldering a breeze.
[* icon_note] The solder creates a barrier between the tip and environment, dramatically reducing the rate of oxidation.
+[* black] If solder isn't "wetting" (flowing onto) the tip, the iron either isn't at working temperature or the tip isn't clean.