Histórico do passo nº 5 do guia How to Clean and Tin a Soldering Iron Tip

Alterações no passo nº 5

Edição por Connor — 24 de set de 2024

Edição aprovada por Connor

	[title] How to Use Tip Tinner
	[* icon_note] If your tip is still oxidized after attempting to tin the tip, it's time to bust out [product\|IF317-031\|tip tinner\|new_window=true], also known as cleaning paste, reactivation paste, or chemical paste. Tip tinner is generally a mix of aggressive flux and solder, serving the dual purpose of eating away oxidation while tinning the tip.
	[* icon_caution] Just like when you're soldering, always tin your tip in a well-ventilated area.
	[* black] Heat the soldering iron to working temperature and insert the tip into the pot of tip tinner. Rotate the tip in the tinner for 3-4 seconds and ensure that the entire working surface is exposed to the compound.
-	[* black] Clean off excess tinner with your brass ~~cleaning ball or~~ sponge.
+	[* black] Clean off excess tinner with your brass or cellulose sponge.
	[* icon_caution] Overuse of tip tinner will reduce tip lifespan. The aggressive flux in tip tinner will, over time, degrade the iron plating. If you're keeping the tip clean and tinned, you shouldn't need to use tip tinner any more than every 20-30 sessions.