Conserte seus objetos Comunidade Loja

Alterações no passo nº 5

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Heavy Oxidation
[* black] Heat the soldering iron to working temperature and insert the tip into the tip tinner. Rotate the tip for 2-4 seconds to ensure that the entire working surface is exposed to the compound.
[* black] [Pic one: hot iron tip inserted into compound. Pic two: tip rotating in compound. Pic three: Tip removed from compound, looking nice and shiny.]
-[* icon_note] Tip tinner is generally a mix of aggressive flux and solder, serving the dual purpose of eating away oxidation whilst tinning the tip. Overuse of tip tinner will reduce the iron's lifespan, as the acid will remove a bit of the iron plating as well.
+[* icon_note] Tip tinner is generally a mix of aggressive flux and solder, serving the dual purpose of eating away oxidation whilst tinning the tip.
+[* icon_caution] Overuse of tip tinner will reduce the iron's lifespan, as the acid will remove a bit of the iron plating as well. Regular tip maintenance should mostly reduce the need.]