Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Regular Cleaning
-[* black] As you're soldering, regularly wiping off the hot iron tip with a brass cleaning ball or a damp cellulose sponge is your first line of defense in keeping the tip functional.
+[* black] As you're soldering, regularly wiping off the hot iron tip with a brass or damp cellulose sponge is your first line of defense in keeping the tip functional.
[* black] ***Brass sponge***: Small brass coils that have a similar texture to steel wool but more wiry. Also called "brass wool," "brass tip cleaner," or "brass cleaning ball." Most solderers prefer it because it's long-lasting, low maintenance, and doesn't drop tip temperature.
[* black] ***Cellulose sponge***: Usually come with most soldering workstations. Not as long-lasting as a brass sponge and ***must be kept damp*** (not soaking wet!) with distilled water while in use.
[* icon_caution] Synthetic sponges can melt and damage your iron tip. If you're using a sponge, be sure it's made out of cellulose.
[* icon_note] P.S: Most kitchen sponges are synthetic!