Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Connor —

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Light/Moderate Oxidation
-[* black] As you're soldering, regularly wipe off the hot iron tip with a brass cleaning ball or a sponge damp with deionized water.
+[* black] As you're soldering, regularly wipe off the hot iron tip with a brass cleaning ball or a celluose sponge damp with deionized water.
[* black] ***Brass wool***: Like steel wool—but brass. Many solderers prefer it because it's abrasive and doesn't need to be damp.
- [* icon_caution] Be sure to buy brass wool from a reputable source; cheap counterfeits are often just steel wool covered in a thin layer of copper and will damage your tip.
- [* black] ***Celluose sponge***: Usually comes with most soldering workstations. Not as long-lasting as a brass cleaning ball and must be kept damp, ideally with deionized water.
+ [* icon_caution] Be sure to buy brass wool from a reputable source; cheap counterfeits are abundant and are often just steel wool covered in a thin layer of copper.
+ [* black] ***Celluose sponge***: Usually comes with most soldering workstations. Not as long-lasting as a brass cleaning ball and must be kept damp (not wet!), ideally with deionized water.
[* black] [shot one: Shot of slightly dirty tip about to enter brass ball. Shot two: tighter shot of the tip in the brass ball. Shot three: clean tip removed from brass ball.