Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Connor

Edição aprovada por Connor

Antes
Depois
Sem alteração

Linhas do passo

[title] Light Oxidation
-[* black] As you're soldering, you should be regularly wiping the tip of your iron off with a brass cleaning ball or a sponge damp with deionized water.
+[* black] As you're soldering, you should be regularly wiping off the hot iron tip with a brass cleaning ball or a sponge damp with deionized water.
[* black] Brass ball:
- [* black] Damp sponge:
+ [* black] Sponge:
[* black] [shot one: Shot of slightly dirty tip about to enter brass ball. Shot two: tighter shot of the tip in the brass ball. Shot three: tip pulled out of the brass ball.
[* black] After wiping the tip clean, be sure to tin the tip either with solder or tip tinner; while, soldering, you should always have a layer of solder covering the working surface.
[* icon_note] We'll go over tinning the tip in a bit.