Alterações no passo nº 2
Linhas do passo
| [title] Light Oxidation | |
| [* black] As you're soldering, you should be regularly wiping the tip of your iron off with a brass cleaning ball or a sponge damp with deionized water. | |
| + | [* black] Brass ball: |
| + | [* black] Damp sponge: |
| [* black] [shot one: Shot of slightly dirty tip about to enter brass ball. Shot two: tighter shot of the tip in the brass ball. Shot three: tip pulled out of the brass ball. | |
| [* black] After wiping the tip clean, be sure to tin the tip either with solder or tip tinner; while, soldering, you should always have a layer of solder covering the working surface. | |
| [* icon_note] We'll go over tinning the tip in a bit. |