| - | [* black] As you're soldering, you should be regularly wiping the tip of your iron the use either a brass ball or a sponge damp with deionized water to remove excess solder and flux residue. |
|---|
| - | [* icon_note] Distilled water is more widely available and will still work pretty well. |
|---|
| - | [* black] After wiping the tip clean, be sure to tin the tip either with solder or tip tinner. |
|---|
| + | [* black] As you're soldering, you should be regularly wiping the tip of your iron off with a brass cleaning ball or a sponge damp with deionized water. |
|---|
| + | [* black] [shot one: Shot of slightly dirty tip about to enter brass ball. Shot two: tighter shot of the tip in the brass ball. Shot three: tip pulled out of the brass ball. |
|---|
| + | [* black] After wiping the tip clean, be sure to tin the tip either with solder or tip tinner; while, soldering, you should always have a layer of solder covering the working surface. |
|---|
| + | [* icon_note] We'll go over tinning the tip in a bit. |
|---|