Alterações no passo nº 7
Edição por Jack Pateracki —
Edição aprovada por Jack Pateracki
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] OPTIONAL: Disconnect the power cord from the lower circuit board. |
|---|---|
| + | [* black] This step is optional. The power cord called are the black and white connectors on the left. I did not get a picture of the connector for the ground cable (green). It is connected to the side of the warmer. Removing the power cord can make working on the warmer easier. |
| + | [* black] I did not know that the white coard was taped to the inside of the warmer. In the photo it is still connected. |
Imagem 1
Nenhuma imagem anterior
Adicionado