Alterações no passo #1
Edição por Walter Galan —
Edição aprovada por Walter Galan
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] In the following steps, you will be placing the remaining pieces of adhesive on the front panel. |
| [* black] '''Do not peel the |
| [* black] '''Do not peel the |
| [* black] Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket. |
| [* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel. |