Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Sarah Westberg —

Edição aprovada por Sarah Westberg

Antes
Depois
Sem alteração

Linhas do passo

[title] Opening the Case
-[* black] Remove all 10 screws in order to access the third layer and the motherboard of the 3DS. Don't forget the one near the game card slot, it is silver, not black.
-[* black] Carefully open up the next layer of the 3ds pulling from the bottom, this way you won't rip any of the ribbon wires located at the top.
+[* black] Remove all 10 screws to access the third layer and the motherboard of the 3DS. Don't forget the one near the game card slot, it is silver, not black.
+[* black] Carefully open up the next layer of the 3DS pulling from the bottom, this way you won't rip any of the ribbon wires located at the top.
[* black] Leave screws to the side for later reassembly.