Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Andres Matias Dabas —

Edição aprovada por Andres Matias Dabas

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Make sure the flash is open.
-[* black] Remove the battery and the lens. To remove the lens, face camera toward you, press the button as shown, and rotate the lens clockwise.
-[* black] Replace the lens with a lens cover. This will keep dirt and tools from damaging the inside of the camera.
+[* black] Ensure that the Built-in flash is OPEN before proceeding.
+[* black] If present, remove the lens. To remove the lens, press and hold the lens-re-lease button while turning the lens clockwise. Be sure the camera is off when removing or exchanging lenses. Keep the lens mount covered with the supplied body cap to ensure that no dust, dirt, or other foreign matter enters its inside.
+[* black] Remove the battery. To remove it, while keeping the camera off, slide the battery-chamber cover latch to the open position and remove the battery.