Alterações no passo nº 6
Edição por Yadhira Coria —
Edição aprovada por Yadhira Coria
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Move the heat shrink to the solder area and use a heat source for the heatsink starting from the middle of the solder area and moving towards the end of the soldier to the insulation.The heat shrink acts as insulation for the wire |
|---|---|
| + | [* black] Move the heat shrink to the solder area; completely cover the area. Using a heat source (i.e.,grill lighter), begin heating the middle of the solder area and slowly move towards the end of the soldier to the insulation.The heat shrink acts as insulation for the wire. |
| + | [* icon_note] The process should not exceed more than ten seconds. |