Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Ben Blischke —

Edição aprovada por Ben Blischke

Antes
Depois
Sem alteração

Linhas do passo

-[title] Move the snag to the back side to the fabric
-[* black] Stick the needle into the base of the snag.
+[title] Pull snag loop through
+[* black] Pass the needle through the bottom of the snag loop.
[* black] Wrap the thread around the sharp end of the needle.
-[* black] Then, move the needle through the fabric. The thread will move as well on the back side.
+[* black] Then, pass the needle through the fabric. The snag loop will also be pulled through by the textured part of the needle. Keep pulling it through, until both the needle and the snag loop are on the inside of the item.