Alterações no passo nº 4
Edição por Ben Blischke —
Edição aprovada por Ben Blischke
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [title] Replace the zip slider with a new one. |
|---|---|
| - | [* black] Find a new slider, matching with the zip tape size. |
| - | [* black] Re-insert it into the zip tape. |
| + | [title] Replace the zip slider |
| + | [* black] Remove any pullers/toggles/fasteners from the zipper puller, and set them aside. These can be reused later. |
| + | [* black] Find a new slider, matching with the zip tape size. Craft shops, sewing shops, or even second-hand shops are great places to find these. |
| + | [* black] ***Tip: ***to determine the zipper puller size, check for the number on the backside. For more information, check out the iFixit guide [[Plastic Tooth Zipper Size#:~:text=To%20find%20your%20zipper%20size,%22S%22%20in%20some%20cases.|here|new_window=true]]. |
| + | [* black] Take your new zipper puller, and insert it back onto the zip from the topside... |
| + | [* black] ... and pull it down to the middle of the zip. |