Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #11

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the power supply shield
[* black] On the right side of the monitor, remove the remaining screws holding the upper shield in place.
[* black] Lift the lower plate up while removing the power supply shield to remove it from the monitor. Once this is done, you will have access to the power supply.
[* icon_note] Removal of the lower shield is not required. While you do not need to remove it, it can simplify reassembly by makingrequired to access the power supply. However, removing it a one handed jobwill make disassembly easier. If you choose to remove it, unclip the plastic tabs that holdare used to keep it in, while lifting up to remove itin place.
[* icon_note] Removal of the lower shield is not required. While you do not need to remove it, it can simplify reassembly by makingrequired to access the power supply. However, removing it a one handed jobwill make disassembly easier. If you choose to remove it, unclip the plastic tabs that holdare used to keep it in, while lifting up to remove itin place.