Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #11

Edição por Nick

Edição aprovada por Nick

Antes
Depois
Sem alteração

Linhas de Passo

[title] Removing the power supply shield
[* black] On the right side of the monitor, remove the screw securing the power supply shield. You also want to remove the screw on the top that's below the panel PCB.
[* black] Lift up the lower plate to removeup while removing the power supply shield to remove it from the monitormonitor to get to the power supply. There is no need to completely remove the plate you lifted up to do this. However, if you choose to do this you can very easily do so by unlatching it from the panel frame.
[* black] Lift up the lower plate to removeup while removing the power supply shield to remove it from the monitormonitor to get to the power supply. There is no need to completely remove the plate you lifted up to do this. However, if you choose to do this you can very easily do so by unlatching it from the panel frame.